Bondstrand GRE Piping
- Home
- Bondstrand GRE Piping
Bondstrand 2000 is recommended for dilute acids and caustics, produced/hot water, industrial waste and condensate returns. Bondstrand 2000 piping system is designed and rated to meet requirements of ASTM D2996 and ASTM D2310, meeting criteria for Type 1, Grade 1, Class F, National Sanitation Foundation Standard 61 (Drinking Water Components) and MIL-P-29206A for aviation fuel. Product recommended for hot water service, such as condensate return lines.
Filament-wound pipe with Quick-Lock adhesive-bonding systems for close tolerance systems. Aromatic Amine cured epoxy for high toughness and temperature performance. A wide range of lined filament-wound (GRE) fittings are available. For special fittings not listed in the product guide, please contact us.
Bondstrand 2400 is recommended for salt waters, brackish water, fire protection, potable/waste water and sewage, oil field reinjection, crude oil transmission and mild chemicals.
Bondstrand 2400 piping system is designed and rated to meet requirements of API 15LR, ISO 14692 and ASTM D2310. Taper/Taper adhesive bonded joint used for maximum pressure performance throughout product diameter and pressure range. Key-Lock mechanical joint can be used on pipe connections for ease and speed of assembly. Fittings in smaller diameters may be used over wide range of pressure classes.
Filament-wound (GRE) pipe with an integral Taper female x shaved spigot adhesive bonded joint or Key-Lock integral female x male mechanical joint. Fittings are GRE with integral Taper female bell ends with a wide range available. Product line is well suited for higher pressure applications or where higher service factors are needed.
FGS Products has strategically broadened its scope to also include corrosion control and prevention to a variety of industries. GRE products solve the problems inherent in traditional materials in tough applications and follow the philosophy of giving our customers a competitive advantage by providing value and innovation.
We offer a variety of joining and sealing systems that include mechanical (threaded), threaded with gasket seal and adhesive bonded systems for both pipe and fittings.
- Corrosion Control: Impervious to corrosion and resistant to chemical attack caused by CO2, H2S and saltwater. Requires no protective linings, coating, wraps or cathodic protection to resist external corrosion.
- Reduced Installation and Maintenance Cost: Light and easy to handle, fewer personnel and less equipment.
- Improved Flow Capacity: Smoother interior pipe surface increases efficiency and resists scale/paraffin build-up.
- Long Service Life: Calculated design life of 20 years - Actual service life of over 30 years and counting.
- Reliability: “Install-It and Forget-It” Performance.
Series 2000M
- Diameter: 2-40 inch
- Pressure Class: 16 bar
- Quick-Lock adhesive bonded joint – 2” to 6”
- Taper-Taper adhesive bonded joint > 6”
- Standard with 0.5mm liner
- Maximum design temperature 121° C
- Wall thickness in accordance to IMO external pressure requirement
Series 7000M
- Diameter: 2-40 inch
- Pressure Class: 16 bar
- Quick-Lock adhesive-bonded joint – 2” to 6”
- Taper-Taper adhesive joint > 6”
- Standard unlined. Conductive liner available
- Maximum design temperature 121 0C
- Conductive filaments in pipe wall
- Conductive adhesive
- Wall thickness in accordance to IMO external pressure requirement
Series 2400M
- Diameter: 2-40 inch
- Pressure Class: 75 bar
- Taper-Taper adhesive joint
- Key Lock Joint
- Available as lined or unlined pipe
- Available as conductive or non conductive pipe
- Maximum design temperature 121 0c
BONDSTRAND LD
- Size available: 44”, 48”, 52”, 56” and 60”
- (1100, 1200, 1300, 1400, 1500 mm)
- Available up to internal pressure 225 psi (16 bar)
- Available with external collapse pressure up to 58 psi (4 bar)
- Laminated joints
BONDSTRAND FP Products
Bondstrand™ 2000M/7000M for Marine & Offshore
Glassfiber Reinforced Epoxy (GRE) pipe system. Standard 0.5 mm internal resin-rich reinforced liner.
- Maximum operating temperature: 93°C (for higher temperature rating, consult NOV Fiber Glass Systems).
- Maximum pressure rating: 17.2 bar (250 psi) for 1 – 16 inch, 16.0 bar (232 psi) for 18 – 40 inch.
- Minimum pressure: full vacuum.
- External Pressure Requirements: In accordance with IMO Regulations.
Bondstrand 7000M (*conductive)
- Glassfiber Reinforced Epoxy (GRE) pipe system.
- Maximum operating temperature: 93°C (for higher temperature rating, consult NOV Fiber Glass Systems) with comingled carbon fibers.
- External Pressure Requirements: In accordance with IMO Regulations.
- Maximum pressure rating: 17.2 bar (250 psi) for 1 – 16 inch, 16.0 bar (232 psi) for 18 – 40 inch.
- Minimum pressure: full vacuum.
Conductive – Our conductive pipe systems have been developed to prevent accumulation of potentially dangerous levels of static electrical charges. Pipe, fittings and flanges contain high strength conductive filaments. Together with a conductive adhesive this provides an electrically continuous system.
Bondstrand™ 2000M/7000M for Marine & Offshore
Glassfiber Reinforced Epoxy (GRE) pipe system. Standard 0.5 mm internal resin-rich reinforced liner.
- Maximum operating temperature: 93°C (for higher temperature rating, consult NOV Fiber Glass Systems).
- Maximum pressure rating: 17.2 bar (250 psi) for 1 – 16 inch, 16.0 bar (232 psi) for 18 – 40 inch.
- Minimum pressure: full vacuum.
- External Pressure Requirements: In accordance with IMO Regulations.
Bondstrand 7000M (*conductive)
- Glassfiber Reinforced Epoxy (GRE) pipe system.
- Maximum operating temperature: 93°C (for higher temperature rating, consult NOV Fiber Glass Systems) with comingled carbon fibers.
- External Pressure Requirements: In accordance with IMO Regulations.
- Maximum pressure rating: 17.2 bar (250 psi) for 1 – 16 inch, 16.0 bar (232 psi) for 18 – 40 inch.
- Minimum pressure: full vacuum.
Conductive – Our conductive pipe systems have been developed to prevent accumulation of potentially dangerous levels of static electrical charges. Pipe, fittings and flanges contain high strength conductive filaments. Together with a conductive adhesive this provides an electrically continuous system.
Bondstrand Composite Pressure Vessels
We design and manufacture premium quality Fiber Reinforced Polymer (FRP) composite pressure vessels which are the perfect fit for demanding offshore applications. Our pressure vessels use the same material, and filament wound manufacturing process as Bondstrand™ piping, which has been extensively used in offshore applications for the last 50 years. Manufactured using high quality glass and epoxy resin, and available from from 4 to 60 in. diameter, our FRP composite pressure vessels provide a lightweight and corrosion resistant alternative to metallic pressure vessels.
Using a combination of our unique Advanced Design and Advanced Manufacturing (ADAM) capabilities, and the outstanding reputation for quality that Bondstrand piping has; we can manufacture FRP pressure vessels to client specified design codes, including ASME X.
In-house capabilities in cutting-edge design and innovation, specialist fabrications, and a comprehensive range of engineering services allows our team of experts to provide high quality and tolerance, advanced automated manufacturing equipment and processes, as well as an all-inclusive solution, from offshore surveys, Finite Element Analysis (FEA), Computer Aided Design (CAD), through to manufacture and installation.
